Wireless Closer Contact Interface, 3-channels, flush mount

The wireless closer contact interface serves as a switching state detection system for standard switches, magnetic contacts (reed contacts), or limit switches. A change in switching state is detected, internally stored, and transmitted as a status information to the qleverGATEWAY. Up to 3 switches/contacts can be connected to this device.

The device sends a switch-on signal when the switch/contact is opened (stands for an open circuit). The qleverAPP interprets a switch-on signal as a switched component within the event handling and as an open door or window when displaying the status of doors and windows.

The device sends a switch-off signal when the switch/contact is closeded (stands for a closed circuit). The qleverAPP interprets a switch-off signal as a switched-off component within the event handling and as a closed door or window when displaying the status of doors and windows.

Technical Data

Power supply
3 V
Batteries
1x CR2032 lithium coin cell battery
Battery lifespan
up to 3 years typically (6 operations per day)
Protection Rating
IP20
Dimensions
approx. 50 x 10 mm (Diameter x H)