Wireless Carbon Dioxide Sensor

The wireless carbon dioxide sensor is used to measure the CO2 content in a room. The sensor is located in an adapter housing and runs on the mains power supply. As soon as the CO2 content exceeds a defined level, a switching command is sent to the qleverGATEWAY. If an event is defined for this command, it will be executed, e.g. switching on or off other connected devices or opening a window. The CO2 content continues to be measured; a second switching command is sent accordingly after 20 minutes and every 10 minutes respectively, until the CO2 level is below the defined level.

Technical Data

Operating voltage
230 V / 50 Hz
Stand-by consumption
1.2 W
Protection Rating
IP20
Dimensions
approx. 125 x 63 x 40 mm (H x W x D, without the plug)
Backside Image

HM-Funk-Zwischenstecker-Rückseite